IAB Interactive Standardized Equipment List   return to main tree

Search Interactive SEL:



SEL Number: 01CB-02-ENSM
Title: Ensemble, HazMat Emergency and Terrorism Incident Protective, NFPA 1994 Class 2


Last Updated: 4/3/2024 5:01:44 PM

Previous SEL Number: 01CB-02-ENSM

Description: NFPA 1994 Class 2 HazMat Emergency and CBRN Terrorism Incident Protective Ensemble, including garment, gloves, footwear, and CBRN SCBA (certified as compliant with the NFPA 1994 Class 2 requirements of NFPA 1990). NFPA 1994 Class 2 certifications specify these elements by make/model -- using any element other than those specified invalidates the certification. The elements of this Item should be purchased and used as a complete ensemble.

ImportantFeatures: Ensembles certified as compliant with NFPA 1994 Class 2 requirements consist of a full body one- or multi-piece garment, gloves, footwear, and CBRN Self-Contained Breathing Apparatus (SCBA ). Note that the certification applies to a specific set of elements identified by make/model (garment, gloves, boots, SCBA ) and the ensemble certification is void unless the specified elements are used (e.g., it is not permissible to substitute a respirator that have not been certified as part of the ensemble). Footwear certified to certain other standards (e.g., NFPA 1950, NFPA 1970) is acceptable if the footwear height is at least 8 inches when measured from the floor.

The ensemble may be designed with the SCBA worn inside or outside the ensemble. The ensemble is designed to minimize the inward leakage of gases or vapors as demonstrated by a man-in-simulant test where performance levels have been set at levels commensurate with protection in an IDLH (Immediately Dangerous to Life or Health) environment. Ensembles are further evaluated for integrity with respect to liquid penetration. Materials are tested for permeation resistance to selected chemical agents and toxic industrial chemicals at concentrations consistent with the same levels used for evaluating CBRN SCBA ; materials are also tested for viral penetration resistance, and various physical properties to demonstrate adequate physical hazard resistance and durability for a single use. Ensembles are also tested for functionality.


Operating Considerations: Class 2 ensembles are designed to protect emergency first responder personnel during hazardous materials emergencies and at terrorism incidents involving vapor or liquid chemical hazards where the concentrations are at or above Immediately Dangerous to Life or Health (IDLH) levels, requiring the use of SCBA .

Conditions of exposure include possible contact with vapors, gases, liquids, aerosols, particulates and highly contaminated surfaces at the emergency scene where potential skin contact is expected to be limited. The condition of victims may vary. Most victims in the response area would likely be alive and show signs of movement, but non-ambulatory. For Class 2 ensembles, breathing air from the SCBA may limit wearing time. Use considerations are provided in OSHA Title 29 CFR Sections 1910.120 and 1910.132, and NFPA 1500, Standard on Fire Department Occupational Safety and Health Program."


Training Requirements: Core Training: NFPA 470 Chapters 6, 8, 10 as applicable, OSHA 1910.120, OSHA 1910.132.
Initial Training: Moderate (1-2 days)
Sustainment Training: Moderate (1-2 days)


Mandatory Standards:


Applicable Standards and References:


MSSL:
  • Forensic Technician
  • REL: Full Canadian Recommended Equipment List
  • REL: LOS-1, Multi-Agency Intervention
  • REL: LOS-2, Scout/Reconnaissance Mission